Chauvet DJ Intimidator Spot 110
Compact movement beside the booth
12-channel · 12 channels per fixtureMusic reactive lighting for mobile DJs
Build your rig once, adapt it to each venue in 3D and run the lights from your Mac laptop.
Example layout: 6 × 4 m. Simplified 3D preview.
THE EXAMPLE RIG
Six lights. One portable rig.
A 6 × 4 m dance floor: two compact movers beside the DJ and four washes on stands for floor or backdrop color.
Chauvet SlimPAR Pro Q
Color on the floor, walls or booth backdrop
5-channel · 5 channels per fixture44 channels in one universe. Keep the same addresses between gigs; update positions to suit the room.
Connections
MUSIC INPUTXDJ-XZ all-in-oneUSB audio →LIGHTING ENGINEVery Lit on Mac laptopUSB →DMX OUTPUTENTTEC DMX USB ProDMX →YOUR RIGFixtures
iPad in SafariWi-Fi + internet →Very Lit cloudInternet →Mac laptop
Keep the DJ device connected to your speakers as usual.
WHAT ELSE YOU NEED
Equipment
Mac laptop
macOS 14 or later, mains power and enough USB ports. Test Very Lit alongside your DJ software.
All-in-one DJ system
XDJ-XZ or OPUS-QUAD with USB mix capture. For gear without that route, use a stereo USB audio interface fed from a line-level output.
ENTTEC DMX USB Pro
One USB-to-DMX interface for this rig. Choose USB Pro, rather than Open DMX USB.
Packing list
Rated stands, cases, labeled power and DMX cables, termination and connector adapters.
iPad connection
Tested venue Wi-Fi or a travel router/hotspot with internet access for both devices.
SET UP VERY LIT
Set up Very Lit
Save the travel rig
Add exact models and modes, set fixed addresses and group movers and washes separately. Keep the patch list in your cable case.
Adapt the room
Update the floor and fixture positions for the venue. Keep movement on the dance floor and away from dinner tables.
Connect DJ audio
Connect the XDJ-XZ by USB, install its Mac audio software if required and select it in Audio input. Check for unwanted cue or DVS audio.
Connect DMX
Plug in the ENTTEC USB Pro, enable output and map the universe. Match fixture modes and addresses, then test each light.
Check and pack
Walk the room with the iPad remote. After the gig, shut down output and return labeled cables and adapters to their cases.
IPAD OVER WI-FI
Check the look from the audience.
Soften the lighting for dinner or speeches, then raise the energy for dancing.
- Run your show on the Mac laptop. Connect both the Mac and iPad to the internet.
- On the iPad, open verylit.club/remote in Safari and sign in with the show’s account.
- Adjust energy, choose a palette or select Blackout in Modes.
Try it with your rig.
Try the 3D demo →Install the Mac app
Requires macOS 14 or later.
- InstallUnzip the download and drag Very Lit into Applications.
- Sign inOpen Very Lit and choose Link to Cloud.
- Allow accessApprove Microphone and Local Network when asked.